Ethernet Media Converters increase LAN distance and protect against interference. These converters change Ethernet twisted pair copper wires into fiber optic signals. Fiber optic is impervious to interference and will extend the distance of a network 2km in each segment.
Extend Ethernet or convert different fiber types. Take your pick from these twelve media converters. Fiber-to-fiber options connect different mode fiber ports. Long distance versions extend your Ethernet communications (40 or 80 km).
Extended temperature and voltage specifications allow installation in the toughest environments. These media converters will convert copper to fiber and extend distances up to 2 km with multi-mode fiber or 20 km with single-mode fiber.
Are you faced with a single operating fiber cable and the need to duplex over it? This pair of media converters can be the answer. A converter on each end of the fiber takes the Ethernet signal from copper to fiber and from fiber back to copper, but with each end transmitting single-mode on a slightly different frequency. The opposite end receives only on that frequency. So the two signals pass both ways at once through the single strand without interference.
Servers
