Industrial Gigabit and PoE Ethernet Switches
Featuring 1000Mbps speeds, Power over Ethernet and wide temperature
| Features | Benefits |
|---|
| Gigabit Speeds (400 and 600 series) | Higher throughput for high bandwidth networks |
| PoE (EIRP series) | Power over Ethernet simplifies remote powering |
| Rugged IP30 DIN/Panel Mount Metal Case | Built tough for harsh industrial environments |
| Dual Power Inputs with Alarm Output | Redundancy ensures the network keeps running |
| Wide Temperature Rating on –T models | Suited for extreme temperature environments |
Gigabit
B&B Electronics’ line of unmanaged (EIR400 series) and managed (EIR600 series) Ethernet switches address applications
requiring Gigabit (1000Base) Ethernet. All of these switches are DIN or panel mountable and accommodate two power inputs
along with an Alarm Relay Output. The –T models are wide temperature rated at -40 to 75ºC. For added flexibility and future
expansion options, many models support a dual function port, where the copper Ethernet and SFP ports are shared. The wide
range power input on these models makes each switch suitable for a variety of applications.
PoE (IEEE 802.3af)-EIRP models only
PoE stands for Power-over-Ethernet, which is just what it says. Power is transmitted over the Ethernet cable along with the data
lines. Each PoE switch has a set of ports that is classified as power source equipment (PSE). These ports can be used to power
IEEE 802.3af compliant powered devices (PD), eliminating the need for a separate power line to be run to each end device. A
whole new set of applications become feasible with PoE switches due to reduced installation costs through ease of setup and
the ability to remotely power end devices. Some common Ethernet devices that a PoE may be able to power are: Access Points,
IP Cameras, Serial Servers, and Ethernet I/O. The PoE ports on these switches follow Alternative A standards and are limited to
15.4 Watts of power output per port. These switches require a 48VDC power supply.
| Model Number |
Total Ports |
10/100 |
10/100/1000 |
PoE 10/100 |
SFP |
Managed/
Unmanaged |
Gigabit/
PoE |
Power Input (VDC) |
Temp (°C) |
|
Price |
EIR405-T
|
5 |
|
5 |
|
|
Unmanaged |
Gigabit |
12 to 48 |
-40 to 75 |
|
|
| EIR405-SFP-T
|
5 |
|
4 |
|
1 |
Unmanaged |
Gigabit |
12 to 48 |
-40 to 75 |
|
|
| EIR410-2SFP-T
|
10 |
8 |
(2) |
|
(2) |
Unmanaged |
Gigabit |
12 to 48 |
-40 to 75 |
|
|
| EIR418-2SFP-T
|
18 |
16 |
(2) |
|
(2) |
Unmanaged |
Gigabit |
12 to 48 |
-40 to 75 |
|
|
EIR608-2SFP
|
8 |
|
6 + (2) |
|
(2) |
Managed |
Gigabit |
12 to 48 |
-10 to 60 |
|
|
| EIR608-4SFP
|
8 |
|
4 |
|
4 |
Managed |
Gigabit |
12 to 48 |
-10 to 60 |
|
|
| EIR610-3SFP-T
|
10 |
7 |
(3) |
|
(3) |
Managed |
Gigabit |
12 to 48 |
-40 to 75 |
|
|
| EIR618-2SFP-T
|
18 |
16 |
(2) |
|
(2) |
Managed |
Gigabit |
12 to 48 |
-40 to 75 |
|
|
| EIRP305-T
|
5 |
1 |
|
4 |
|
Unmanaged |
PoE |
48 |
-40 to 75 |
|
|
| EIRP610-2SFP-T
|
10 |
|
(2) |
8 |
(2) |
Managed |
Gigabit/PoE |
48 |
-40 to 75 |
|
|
Ports designated with () indicate the copper and SFP ports are shared. Once the SFP Port is utilized, the copper port is disabled.
Accessories
Model No. |
Description |
Price |
DR19RMKT
|
|
|
New! EIRSP1
|
|
|
New! MDR-100-48
|
|
|
MDR-60-24
|
|
|
SFP-1000LX-S-10KM-T
|
SFP Module, 1000Base-LX, Single-mode 10km, LC Connector (-40 to 85°C)
Datasheet
|
|
SFP-1000LX-S-20KM-T
|
SFP Module, 1000Base-LX, Single-mode 20km, LC Connector (-40 to 85°C)
Datasheet
|
|
SFP-1000SX-M-550M-T
|
SFP Module, 1000Base-SX, Multi-mode 550m, LC Connector (-40 to 85°C)
Datasheet
|
|
SFP-100FX-M-2KM-T
|
SFP Module, 100Base-FX, Multi-mode 2km, LC Connector (-40 to 85°C)
Datasheet
|
|
SFP-100FX-S-30KM-T
|
SFP Module, 100Base-FX, Single-mode 30km, LC Connector (-40 to 85°C)
Datasheet
|
|
|
Servers
