Field Application:
GCL Typical Application: Water Tank Control
 Two ADAM-6000 modules are the only hardware used for this automation application - no other controller or computer required. ADAM-6017 module is located on the rooftop, connecting to the water level sensor in the tower. ADAM-6050 module is located int he basement, controlling the water pump
The two ADAM modules are connected across the building's Ethernet network - no extra wiring is needed. GCL is running on the ADAM-6017 module, continuously comparing the water level with a specific limit value.
If the water level is less than the limit value, it will trigger the ADAM-6050 module's D/O channel to start the pump and fill the water tank. No need to write any program. It takes less than 5 minutes to complete the configuration using the ADAM.NET utility.
View All ADAM-6000 Series Modules
|
